Category Archives: VMware

Which two connections might cause the issue?

A user attempts a remote SSH connection to a newly installed ESXi 5.x host to execute some commands. The SSH connection attempts fails, through the user is able to receive a ICMP ping back from the host. Which two connections … Continue reading

Posted in VCP考試 | Leave a comment

VMWare I/O Latency Problem

最近拿一台HP DL380 G5的機器來裝VMWare ESXi 5.0 預備要將PWS機器轉到上面 去發生最近一直有 VMWare I/O Latency 的 Problem 在經過曾老師跟育豪的努力下 發現了開機進入raid設定時有一個奇怪的設定 write cache 0% read cache 100% 於是乎就把把比例調成 write cache 50% read cache 50% 結果就正常了!!!! 怪摘~~玩VM那麻久從沒遇過這個問題啊= =

Posted in VMware | Leave a comment

VMWare : The parent virtual disk has been modified since the child was created.

今天發生了這個意外插曲….. Reason: The parent virtual disk has been modified since the child was created. The content ID of the parent virtual disk does not match the corresponding parent content ID in the child. 上網查了一下主要是因為我有動到主要的vmdk檔,導致SnapShot的vmdk找不到爸爸了….. 所以就要針對vmdk去修正一下 這是主要vmdk的開頭 Disk DescriptorFile version=1 encoding=”UTF-8″ … Continue reading

Posted in VMware | Leave a comment

文字模式下安裝vmware-tool

因為視窗模式真的很少用到… 尤其是在遠端或是虛擬環境中 所以最近愛上了最小化安裝!! 主要就是要先安裝gcc跟kernel-devel (註記:通常這時候我都已經yum update結束了)

Posted in Linux, VMware | Leave a comment

VMWare VSphere 5.0之差別….

VMWare VSphere出新的版本了!!!!!! 就把之前安裝的幾台VSphere 4.1給更新了~ 發現真的比較順!!! (雖然這之間因為效能的關係搞死我自己,但最後知道都是機王…換了後已經恢復正常)

Posted in VMware | Leave a comment

VMware:Fault Tolerance 設定

VMware 的 Fault Tolerance 2010年6月才隨新版的 ESX 問世,所以覺得還不是很成熟 啟用的時候切記以下幾點 1. VM 的 CPU 數量為 1 2. 關機狀態 3. 啟用後無法以啟用F-T狀態調整硬體設備,必須要disable F-T 4. 可以在一開始創建 VM 時,將硬碟格式勾選 Support F-T Mode ,啟用的設定速度會加快很多 啟用完成後會有第二個 VM 的複本 可以分別進行 F-T 測試、複本的 F-T 測試檢查看看 F-T 是否正常啟用

Posted in VMware | Leave a comment

VMWare:Number of virtual devices exceeds the maximum for a given controller

當 clone 或是 deploy from template 的時候遇到這個錯誤訊息 主要是說明在額外編輯硬體組態設定時出現問題 就先產生一個一模一樣的 VM 再去進行更新吧 PS: 這問題之前怎樣try都沒遇過…可是後來一直出現

Posted in VMware | Leave a comment

關閉擾人的VMware警告聲音

一直以來都覺得他的警告聲音很吵 可是都移除掉了client os的音效一樣給你”嘟~~嘟~~嘟~~” 所以稍微google了一下 終於給解決了!!!!!!!!可喜可賀啊!!!!!!! (雖然現在都用vmware esxi比較多了…..) 解決方法為編輯 C:Documents and SettingsAll UsersApplication DataVMwareVMware Workstationconfig.ini 這個檔案 然後在裡面新增一句話 mks.noBeep = “TRUE” 很簡單的方法~可是我找了很久了…..囧

Posted in VMware | Leave a comment

VM Explorer

為了要把原本在某台ESXi主機中安裝的VM搬移到另外一台ESXi主機上 第一個直覺想到的方法就是利用vSphere中的Browser Datastore的方式 先將要搬移的VM關機,然後下載整個資料夾到本地端電腦中 接著再上傳到準備使用的ESXi主機上 看似很笨的方法,但我想這應該是最簡潔有力的!!! 後來又到網路上稍微找了一下 發現了VM Explorer這套第三方的軟體 據說啦~free for 5 licenses…用看看囉 感覺速度比笨重的vSphere快上許多 在沒有vCenter的情況下,是值得考慮的一個方案 至於搬移效果好嗎? 主要是因為準備要搬移的那台ESXi主機並沒有開啟ssh 所以無法操作,只好繼續下載VM的資料夾在準備搬移了…

Posted in VMware | 2 Comments

VMware ESXi or ESX 使用ftp下載iso

一般來說都是會用vSphere內的Browser Datastore去完成上傳iso檔 不知道是不是因為軟體轉換的關係~都有點久 所以爬了一下文 這網頁內就說明了下載跟上傳的方式 跟以往我常使用的ftp client不一樣 需要直接指明要抓取哪個檔案 是linux busybox 內的指令 下載 ftpget -u -p -P <本地儲存資訊> <下載來源端檔案> 上傳則跟下載很像,只是最後兩個相反了 ftpput -u -p -P <下載來源端檔案> <本地儲存資訊> 又學到一步啦

Posted in Linux, VMware | 1 Comment